Kernau KFWM 8543 I - Performance and Result Issues

EN
102
(*) See the chapter regarding maintenance and cleaning of your machine.
(**) See the chapter regarding installation of your machine.
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Yourmachine
vibrates.
Thefeethavenotbeen
adjusted.
Adjustthefeet.(**)
Transitboltsfittedfor
transportationhavenotbeen
removed.
Removethetransitboltsfromthe
machine.(**)
Smallloadinthedrum.
Thiswillnotpreventoperation
ofyourmachine.
Yourmachineisoverloaded
withlaundryorlaundryis
unevenlyspread.
Donotoverloadthedrum.Spread
laundryevenlyinthedrum.
Yourmachinerestsonahard
surface.
DonotsetupyourWashing
Machineonahardsurface.
Excessive
foam
isformed
inthe
detergent
drawer.
Excessiveamountofdetergent
used.
PresstheStart/Pausebutton.Tostop
thefoam,diluteonetablespoon
ofsoftenerinto1/2litreofwater
andpourintothedetergentdrawer.
PresstheStart/Pausebuttonafter
5-10mins.
Wrongdetergentused.
Onlyusedetergentsproducedfor
automaticWashingMachines.
Unsatisfactory
washingresult.
Yourwashingistoodirty
fortheprogrammeselected.
Usetheinformationinthe
programmetablestoselectthemost
appropriateprogramme.
Amountofdetergentused
insufficient.
Usetheamountofdetergent
asinstructedonthepackaging.
Thereistoomuchlaundry
inyourmachine.
Checkthatthemaximumcapacity
fortheselectedprogrammehasnot
beenexceeded.
Unsatisfactory
washingresult.
Hardwater.
Increasetheamountofdetergent
followingthemanufacturer’s
instructions.
Yourlaundryistootightly
packedtogetherinthedrum.
Checkthatyourlaundryisspreadout.