82
ADDITIONAL FUNCTIONS
1. Delayed start auxiliary function
You can use this auxiliary function to
delay the start time of the washing cycle
for 1 to 23 hours.
To use the delay function:
• Press the delay key once.
• “1h” will be displayed. will turn on in the elctronic display.
• Press the delay key until you reach the time after which you want
the machine to start the washing cycle.
• If you have skipped the delay time you would like to set, you can
keep pressing the delay key until you reach that time again.
• To use the time delay function, you need to press the Start/Pause
key to start the machine.
Note: After selecting the delay function, you can select other functions without touching
the “Start/Pause” key, and then you can touch the “Start/Pause” key to enable time
delay.
To cancel the delay function:
• If you did not press the Start/Pause key, keep touching the delay key until the
electronic display shows the duration of the program you have selected. Once
you see the program time on the electronic display, this means that the delay has
been cancelled.
• If you have pressed the Start/Pause key to start the machine, you just need to
touch the delay key once. will go off on the electronic display, press “Start/
Pause” key to start the washing cycle.
2. Selecting the level of soiling
You can wash your laundries in shorter
or longer durations, at lower or higher
temperatures by selecting a soiling level
depending on the soiling level on your
laundries.
Soiling levels are automatically set in some programs. You can make changes at
your discretion.
Note: If there are no changes in the level when you touch the soiling level key,
it means there is no soiling level selection in the program you have selected.
To Next Page
Loading...
General