Kernau KFWM 8543 I - Installation Guide; Initial Setup and Leveling

69
CHAPTER 3. INSTALLATION
Before operating the washing machine, remove the
4transitboltsandrubberspacersfromtherearofthe
machine.Iftheboltsarenotremoved,theymaycause
heavyvibration,noiseandmalfunctionofthemachine
andvoidthewarranty.
Loosenthetransitboltsbyturningthemanticlockwise
withanappropriatespanner.
Removethetransitboltswithastraightpull.
Fittheplasticblankingcapssuppliedintheaccessories
bagintothegapsleftbytheremovalofthetransitbolts.
Thetransitboltsshouldbestoredforfutureuse.
NOTE:
Removethetransitboltsbeforeusingthemachinefor
thefirsttime.Faultsoccurringduetothemachinebeing
operatedwithtransitboltsfittedareoutofthescopeof
thewarranty.
X4
X
4
REMOVING THE TRANSIT BOLTS
X4