EasyManua.ls Logo

Kernau KFWM 8543 I - Cleaning and Maintenance; Safety Precautions for Cleaning; Filter and Drawer Maintenance

Kernau KFWM 8543 I
106 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
97
Turn off the water supply before starting
maintenanceandcleaningofyourmachine.
CAUTION:
Donotusesolvents,abrasivecleaners,glasscleanersorall-purpose
cleaningagentstocleanyourWashingMachine.Theymaydamage
theplasticsurfacesandothercomponentswiththechemicalsthey
contain.
CHAPTER
7. CLEANING AND MAINTENANCE
Turn your mains power supply off and remove the plug from
thesocketbeforecarryingoutmaintenanceandcleaningofyour
machine.
WARNING
WATER INLET FILTERS
Waterinletfilterspreventdirtandforeignmaterialsfromentering
yourmachine.Werecommendthatthesefiltersarecleanedwhen
yourmachineisunabletoreceivesufficientwater,althoughyour
watersupplyisonandthetapisopen.Werecommendthatyou
cleanyourwaterinletfiltersevery2months.
Unscrewthewaterinlethose(s)fromtheWashingMachine.
Toremovethewaterinletfilterfromthewaterinletvalve,
useapairoflongnosedplierstogentlypullontheplastic
barinthefilter.
Asecondwaterinletfilterislocatedinthetapendofthe
waterinlethose.Toremovethesecondwaterinletfilter,
useapairoflong-nosedplierstogentlypullontheplastic
barinthefilter.
Cleanthefilterthoroughlywithasoftbrushandwashwith
soapywater and rinsethoroughly. Re-insertthe filter by
gentlypushingitbackintoplace.
CAUTION:
The filters at the water inlet valve may become clogged due to water quality or lack
of required maintenance and may break down. This may cause a water leak. Any
such breakdowns are out of the scope of the warranty.

Table of Contents