EN
40
CHAPTER 4. CONNECTION
ELECTRICAL CONNECTION
1. Settingconditionsofthisapplianceisindicatedintagordataplate.
2. Your appliance should be plugged in afuse appropriate for electric power.
Ifnecessary,itisrecommendedthatinstallationisdonebyauthorizedservice.
3. Yourapplianceisconfiguredinaccordancewithelectricalsupplyof220-240V
50/60Hz.
4. If main electrical network is different from these values, contact with your
authorizedservice.
5. Electricalconnectionsofyourapplianceshouldonlybemadetothefuseshaving
suitablywiredgrounding(grounded)system.Ifnoconvenientfuseisavailable
in the place where your appliance is to be installed, contact with authorized
service immediately. Manufacturing firm is not responsible definitely for the
damagesthatfuseswhosegroundingisnotmadeandconnectedtotheappliance
cancause.
6. Plugofthe applianceshouldbeclosetobeaccessedeasilytothefuse whose
groundingismadewithoutuseofextensioncord.
7. Do not allow contacting the power cable of your appliance with hot regions.
Similarly,keepawayitfromsharpedgesandcorners.
8. Iffeedercordisdamaged,thiscordshouldbereplacedeitherbymanufacturerorits
serviceagencyorsamedegreequalifiedpersonnelinordertohinderadangerous
situation.
9. Wrong electrical connection may give damage to the appliance.In this case,
yourappliancewillremainoutofguaranteescope.Electricalconnectionofyour
applianceshouldbedonebyauthorizedservice.
ELECTRICAL CONNECTION SCHEME
Getelectricalconnectionofyourappliancedonetoauthorizedpersoninlinewiththe
followingscheme.
L1
220-240 V ~ 50/60 Hz
H05 VV-F 3G 1.5 mm²
Earth
Terre
Erdung
Neutral
Neutre