1 Notes on this manual
The following conventions make it easier to navigate the
manual:
Symbol Explanation
[1] See Figure 1
(5) Position number 5 from the adjacent figure
...
Action step in figure
Check whether
manual control
has been acti-
vated.
Prerequisite for action
Press OK.
Action step
✓
System is ready
for operation.
Result of action
see "Safety",
page 49
Cross-reference to Chapter 2
Bold type
Particularly important or
safety-relevant information
Italics
Variants or additional information (e.g.
applicable only for ATEX variants)
Technical information or instructions
which must be paid particular attention.
2 Safety
The following symbols are used:
Icon Meaning
Isolate device!
Observe the instructions for use
CE marking
Warning, electricity
WEEE icon, product gov-
erned by RoHS Guideline
Earth before use
WARNING
Warns of a hazard for persons. Ignoring this
warning can lead to serious injuries or death.
CAUTION
Warns of a hazard for persons and mate-
rial. Ignoring this warning can lead to
serious injuries and material damage.
EN
016-102_01 DE_EN_FR Pumping station / Installation and operating manual 49 / 144
To Next Page
Loading...
