16 |
SETUP + OPTIONS
SETUP + OPTIONS
Select the Unit of Measure
Select the unit of measure. While
holding , press to scroll
through the available units of
measure for that measurement.
Adjust the Clock
Adjust the clock. Simultaneously
press and to access clock
setting. While the time is blinking,
press or to change the
time. Hold either button down to
adjust quickly. Simultaneously press
and to exit clock setting.
The unit change function can be
used to toggle the clock between 12
and 24 hour display modes.
Each time a 3550 is connected to the app,
the 3550 clock is updated to match the
time on the mobile device.
Wind Max/Avg Function
To view the maximum wind gust
recorded, press
or until
you see “MAX” appear at bottom of
screen. Press again to view average
wind gust. “AVG” will appear at
bottom of screen. Both Max and
Average are reset each time the
unit is powered down. To restart
averaging, simply turn the unit o
and back on again.
The MAX and AVG wind displayed on
the 3550 are independent of the min/
max/avg session data that is displayed
in the app.
The MAX and AVG wind values are not
available on the app.
To Next Page
Loading...
