20
PAIRING TO A PREVIOUSLY PAIRED DEVICE
» Follow the directions for connecting to a new device
except instead of selecting New in the Name eld, scroll
left or right to nd the desired device.
» Status will change to Searching. If the device is in
range and in active pairing mode, a connection will
be made and Searching will change to Connected,
indicating that the pairing is active and your Kestrel is
ready to communicate.
BLUETOOTH CONNECTION INDICATOR:
» When connected to any LiNK compatible device, a
icon will appear in the Targeting screen in the upper
right.
» If the paired device goes to sleep or if the connection
is lost, the
icon may disappear but waking the device
up or returning within range should automatically
reestablish the connection and the icon should
reappear.
Note! LiNK range is typically 100 ft/30M line of sight. Shorter distances
should be expected if there are obstacles such as walls or metal enclosures.
Range is also impacted by the signal strength of the other device.
CONNECTING TO COMPUTERS USING USB CABLE
All Kestrel 5 Series units can connect to a computer via
the Data Transfer Port using the USB Data Transfer Cable
available separately. Kestrel LiNK software is available for
Windows and Mac for downloading logged weather data
and installing rmware updates.
CONNECT YOUR KESTREL METER TO YOUR
COMPUTER USING THE DATA TRANSFER CABLE:
» On your computer, follow the links at
kestrelinstruments.com/link-connectivity to
download Kestrel LiNK for PC or Mac. Install.
OR (Windows only)
» On your Kestrel in the main Options menu, scroll
to and select Data Port and set to On.
» Insert the USB Data Transfer Cable into a USB port
and plug into the Data Transfer Port on the back
of the Kestrel unit.
» Follow the directions in the Kestrel LiNK program
to conrm the connection and perform program
actions.
To Next Page
Loading...
