9
3. Specifications
Measurement format : Evaporation weight loss method (Heat drying and weight loss method)
Sample weight : 0.5~120 g using selective weight sampling method
Minimum displayable units
: Moisture content (solids): 0.1% or 0.01% (selectable), Weight: 0.001 g
Measurable quantities : Moisture content (wet base & dry base), weight, solid content
Measurement range: : 0-100% (wet base, solids)
0-500% (dry base)
Reproducibility (Standard deviation)*
1
: Samples with a weight of 5 g or higher: 0.05%
Samples with a weight of 10 g or higher: 0.02%
*
1
When using standard samples and measuring conditions as determined
by Kett Electric Laboratory.
Measurement modes : Automatic halting mode
Timed halting mode (with measurement times of 1~240 minutes or
continuous measurement mode, with a maximum measurement time of
12 hours)
High-speed drying mode (may be used with either automatic or timed
halting mode)
Low-speed drying mode (may be used with either automatic or timed
halting mode)
Stepped drying mode (performs drying in 5 steps)
Predictive (comparative) measuring mode
Temperature range : May be set within a range of 30~180°C in 1-degree increments
Display : Backlit LCD display (137 x 43 mm)
External output : RS-232C interface
Communications : Data may be output from the Data Logger software KDL-01 (sold
separately) or similar software.
Storage of measurement conditions
: Allows for storage of 10 sets of measurement conditions
Data memory : Allows for storage of 100 sets of data
Environmental conditions : Pollution degree 2, Altitude up to 2000 m
Temperature/humidity operating range
: 5~40°C, maximum of 85% RH
Heat source : Medium frequency infrared heater (200W x 2)
Temperature sensor : Thermistor
Power supply, Power consumption
: AC 100V~120V (50/60 Hz) 900W
AC 220V~240V (50/60 Hz) 900W
Weight and external dimensions
: 4.5 kg, 220 x 415 x 190 mm (W x D x H)
Sample dish : SUS sample dish (Diameter: 130 mm; Depth 13 mm)
Items included : 2 sample dishes, 2 sample dish handlers, wind shield, sample dish tray,
spoon & spatula set, 2 spare (T8A 250V) fuses, 2 packages of aluminum
foil sheets (10 per package), operating manual
Optional equipment : Printer set (includes a VZ-330 printer, a printer interface cable (VZC-14),
printer paper, and an AC adapter), printer paper (10 rolls), package of
aluminum foil sheets (500 sheets), RS-232C cable (VZC-52),
Data Logger software KDL-01, TQ-100 sample crusher
To Next Page
Loading...