Need help?Do you have a question about the Kett FD-720 and is the answer not in the manual?
Explanation of warning indicators and symbols used in the manual and on the product.
Identifies hot areas of the unit and specifies safe handling points.
Warns against using hazardous, explosive, or toxic materials for measurement.
Advises against flammable items and details proper unit setup and storage.
Steps to zero the scale and start the measurement process.
Explains measurement time display, completion indicators, and viewing results.
Explains how to set the measuring mode, including AUTO, TIME, RAPID, SLOW, STEP, COMPARE, and PREDICT.
Detailed steps for setting the drying temperature for measurements.
Instructions on how to specify and correct for bias in measurements.
Detailed steps for calibrating the unit's scale at two points (0 and 100 grams).
Troubleshooting guide for common error messages and their resolution steps.
Troubleshooting guide for internal component failures and error conditions.
Guides users through calculating bias, evaluating, and obtaining predicted measurements.
Step-by-step guide to calculate bias using comparative measuring mode for predictive measurements.
How to evaluate the accuracy of predicted measurements by comparing them with automatic halting mode results.
Procedure for performing measurements using the predictive measuring mode.
Guide on connecting the unit, setting parameters, and starting data transmission to a computer.
Step-by-step guide for safely replacing blown fuses in the unit.
To Next Page
General