Kettler Quadriga - Appendix; EC Declaration of Conformity

877-00136_1.0_17.09.2018
116
Appendix
10 Appendix
10.1 EC declaration of conformity
Translation of the original EC declaration of conformity
The manufacturer:
KETTLER Alu-Rad GmbH
Longericher Str. 2
50739 Köln
hereby declares that the electrically power assisted cycles of types:
KU117-VAFDxx, KU117-VAFTxx, KU118-VAFDxx, KU118-VAFTxx, KU119-VAFDxx,
KU119-VAFTxx, KU120-VAFDxx, KU120-VAFTxx, KU121-VAFDxx, KU159-VAKDxx,
KU159-VAKTxx
year of manufacture 2018 and year of manufacture 2019,
comply with all applicable requirements of Machinery Directive 2006/42/EC. Furthermore,
the electrically power assisted cycles comply with all applicable basic requirements of
Electromagnetic Compatibility Directive 2014/30/EU.
The following standards were used: EN ISO 12100:2010 Safety of machinery – General
principles of design – Risk assessment and reduction, EN 15194:2015, Cycles – Electrically
power assisted cycles – EPAC bicycles, EN ISO 4210, Cycles – Safety requirements for
bicycles, EN 11243:2016, Cycles – Luggage carriers for bicycles – Requirements and test
methods and EN 82079 1:2012, Preparation of instructions for use – Structuring, content and
presentation – Part 1: General principles and detailed requirements.
Ms. Janine Otto (Technical Editor), c/o KETTLER Alu-Rad GmbH, Longericher Str. 2, 50739 Köln,
is authorised to compile the technical documentation.
Cologne, 27/08/2018
………………………………………………………………………………………………………
Place, date and signature
Egbert Hageböck
-Managing Director-