Kettler Quadriga - Integrated Battery; Removing the Integrated Battery; Inserting the Integrated Battery

NOTICE
877-00136_1.0_17.09.2018
71
Operation
7.4.1 Integrated battery
(Alternative version)

Before the battery is to be removed or inserted, switch
off the battery and the drive system.
7.4.1.1 Removing the integrated battery
 Open the battery lock with the key.
 Pull the integrated battery out of the frame from
below.
 Remove the key from the lock.
7.4.1.2 Inserting the integrated battery
 Place the battery with the contacts first into the
mount above.
 Push the integrated battery downwards so that it
audibly clicks into place.
 Use the key to fasten the battery lock.
 Remove the key.
 Check the inserted battery to make sure it is firmly
in place.
If a key is left inserted when transporting the bicycle or
when riding, it may break off or the lock may open
accidentally.
 Remove the key from the battery lock immediately
after use.
 We recommend that you attach the key to a key
ring.