Kettler Quadriga - Using the Brake Lever; Using the Back-Pedal Brake

877-00136_1.0_17.09.2018
83
Operation
7.9.1 Using the brake lever
1
2
Figure 24: Front (2) and rear (1) brake lever – example: Shimano brake
 Pull the left brake lever for the front wheel brake and
the right lever for the rear wheel brake until the
desired speed is reached.
7.9.2 Using the back-pedal brake
Alternative

The best braking effect is achieved if the pedals are in
the 3 o'clock and 9 o'clock position when braking. To
bridge the free travel between the riding movement
and the braking movement, it is recommendable to
pedal a little beyond the 3 o'clock and 9 o'clock
position before you pedal in the opposite direction to
the direction of travel and start braking.
 Pedal in the opposite direction to the direction of
travel until the desired speed has been reached.