EasyManua.ls Logo

Kettler Quadriga - Cleaning the Display; Cleaning the Brake

Kettler Quadriga
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
877-00136_1.0_17.09.2018
91
Maintenance
8.1.2.9 Cleaning the display
NOTICE
If water enters into the display, it will be permanently
damaged.
Never immerse the display in water.
Never clean with a high-pressure water device,
water jet or compressed air.
Never use cleaning agent.
Remove the display from the bicycle before
cleaning.
Carefully clean the display with a damp, soft cloth.
8.1.2.10 Cleaning the brake
WARNING
!
Brake failure due to water penetration
The brake seals are unable to withstand high
pressures. Damaged brakes can fail and cause an
accident with injury.
Never clean the bicycle with a high-pressure water
device or compressed air.
Take great care when using a hosepipe. Never
point the water jet directly at the seal section.
Clean brake and brake discs with a brush, water
and dish-washing detergent.
Clean brake discs thoroughly with brake cleaner or
spirit.

Table of Contents

Other manuals for Kettler Quadriga

Related product manuals