7
CONTROLS & INDICATORS
Brewer Control Panel
Controls operation and indicates the brewing system status.
Red “Not Ready”
Solid Not Ready - needs water or is
heating water.
Flashing May need to be de-scaled or serviced.
Refer to Troubleshooting on page 13.
Solid Water has reached correct temperature OR
coffee is brewing.
Flashing Brew Drawer has been opened and closed
activating the Brew Button for 60 seconds.
NOTE: Remember, the Brew Button will
not work if the Green "Ready" Light is not
flashing. Open and close the Brew Drawer
to reactivate the Brew Button.
4 Flashes & Stop filling with water.
4 Beeps Water level has reached full.
Green “Ready”
Red
“Not Ready” Light
Green
“Ready” Light
Control Panel Indicators Display Meaning
SECTION 3
“Brew”
Button
To Next Page
Loading...
Need help?
General
