Key Automation CT102B User Manual

16
EN
+24 Vdc - GND + 24 TX PH EDGE EDGE PH2 PH1 STOP OPEN CLOSE PED SS COM
L
N
COM Vac CR
FLASH
11
13
16
14
15
12
5
6
10
19
20
4
17
18
3
1
2
9
7
8
2.1 - Description of the control unit
The CT102 control unit is the most modern, efcient system for the
control of Key Automation motors for the electric opening and closure
of sliding gates and up-and-over doors.
All other, improper, use of the control unit is forbidden. The CT102 has
2.2 - Description of the connections
1- Motor power supply connections
2- Capacitor connector
3- 230 Vac (120 Vac) power supply connections to ashing and
courtesy lights
4- 24 Vdc power supply connection to controls and safety devices
5- RED EDGE PH2-PH1-STOP safety warning LEDs
6- GREEN OPEN-CLOSE-PED-SS command indicator LEDs
7- Radio PCB connector with RX4X connection (4 channels)
8- Antenna connector
9- LCD display
10- Limit switch connector
11- Limit switch indicator LED LS1
12- Limit switch indicator LED LS2
13- UP + button
14- MENU button
15- DOWN - button
16- STEPPING SS button
17- Safety device dip switch
18- Transformer primary
19- Transformer secondary
20- F2- 500 mA rapid fuse protecting the accessories
21- F1- 6.3 A rapid fuse protecting the line
2.3 - Models and technical characteristics
a display allowing easy programming and constant monitoring of the
input status; the menu structure also allows easy setting of working
times and operating modes.
2 - INTRODUCING THE PRODUCT
CODE DESCRIPTION
900CT102 230 V control unit for sliding gates or up-and-over doors
900CT102V120 120 V control unit for sliding gates or up-and-over doors
21
7
J3
RECEIVER RX4X
OUTPUT 1 = STEP BY STEP
OUTPUT 2 = PEDESTRIAN
OUTPUT 3 = OPEN
OUTPUT 4 = CLOSE

Key Automation CT102B Specifications

General

Brand	Key Automation
Model	CT102B
Category	Control Unit
Language	English