-- SPI xx OSP aaaa.bbbb : Display Input xx Name at X/Y-axis(aaaa/bbbb) --
-- SPI xx OSS y : Set Font Size of Input xx OSD by y=[1~3] --
-- y[1=12x24px, 2=24x48px, 3=48x96px] --
-- --
-- Video Output Setup Command : --
-- (xx=[01~04,A=All], yy=[01~05, 05=Multiview]) --
-- SPO xx SB yy : Set Video Output xx to Input yy --
-- SPO xx SI yy : Set Video-Audio Output xx to Input yy --
-- SPO xx PG y : Set Video Output xx with Video Pattern y=[0~9] --
-- (0=OFF, 1=Back Screen, 2=Horizontal Gray Bars ) --
-- (3=Horizontal Gray Scale, 4=Vertical Gray Scale, 5=Color Bars ) --
-- (6=Red Screen, 7=Green Screen, 8=Blue Screen, 9=Grid ) --
-- SPO xx VF yy : Set Video Output xx to Video Format yy --
-- [ yy : 01 = 4K@30, 02 = 1080p@60, 03 = 720p@60 ] --
-- SPO xx DBG ON/OFF : Set Video Output xx's Debug Mode to ON/OFF --
-- --
-- Audio Output Setup Command : (xx=[01~04,A=All], yy=[01~04]) --
-- SPO xx SA yy : Set Audio Output xx to Input yy --
-- SPO xx HA E/D : Set HDMI/UHDoTP Audio Output xx to Enable/Disable --
-- SPO xx AA E/D : Set Balanced Audio Output xx to Enable/Disable --
-- SPO xx DA E/D : Set Optical Output xx to Enable/Disable --
-- --
-- IR Setup Command : (xx=[01~04,A=All], y=[1~2]) --
-- SPO xx IRS y : Set Output xx IR Direction to y [1=IN, 2=OUT] --
-- --
-- Multiview Mode Setup Command : ( xx=[01~04], z=[1~9] ) --
-- ( z: 1=QUAD, 2=UP, 3=DOWN, 4=LEFT, 5=RIGHT, 6~9=MANUAL1~4 ) --
-- SPM AS xx : Set Audio Input xx on Multiview --
-- SPM A E/D : Set Audio Output Enable/Disable on Multiview --
-- SPM AD zzz : Set Audio Delay by zzz=[000~255]ms --
-- SPM VIS : Set Input Swap --
-- SPM VSM z : Set Multiview Mode by Preset z --
-- --
-- Multiview Screen User Setup Command : --
-- ( xx=[01~04], aaaa=[0000~3839], bbbb=[0000~2159] ) --
To Next Page
Loading...
