• KD-AMP220 Control Mode: Command forward to KD-Amp220 for an all-in-one user-friendly control UI
of video switching, audio and speech enforcement
• PTZ USB Camera Integration: Add KD-CAMUSB for full PTZ control via KD-App. Use with KD-XUSB2
extender for USB signal extension over CAT5e/6.
• HDCP Licensing: Fully licensed and compatible with HDCP 2.2
• HDR10+ and Dolby Vision: More life-like images through a greater range of luminance levels
• Power Over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-PS42
• Installation: Half-rack width with rack and under-table mounting ears included
• Signal Extension: For resolution and cable quality
o 4K/UHD (18G): Up to 40m / 131ft
o 1080p: Up to 70m / 230ft
• Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:2:2/12 bit
• Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to
source & display, EDID Control handshake, and Hot Plug Detection Voltage
• EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition
to native EDID data copied from the Rx display/device
• RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit
• Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit
• EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition
to native EDID data copied from the output/display 1
• Digital Audio Format Support: DTS-HD Master Audio™, DTS:X®, Dolby® TrueHD, Dolby Atmos®
• Control System Support: Key Digital® App ready. Compass Control® Pro ready. Fully controllable by
all IR, RS-232, and TCP/IP supported control systems via open API.
Accessories
• Qty 1: Power supply (48V/1.66A, 80W)
• Qty 1: Remote control and battery set
(model KD-RMPS)
• Qty 2: Mounting bracket (L-Bracket)
• Qty 4: L-Bracket mounting screw
• Qty 1: Half-rack ear mount
• Qty 1: Short rack ear
• Qty 4: Rack Ear Screw
• Qty 1: RX Extender (model KD-X40MRx)
• Qty 2: Mounting bracket for KD-X40MRx (L-
Bracket)
• Qty 4: L-Bracket mounting screw for KD-
X40MRx
• Qty 1: 6-pin blue color terminal block plug
• Qty 1: 6-pin green color terminal block plug
• Qty 3: 2-pin green color terminal block plug
• Qty 1: 6ft Micro USB to USB A data cable
(USB 2.0)
• Qty 1: IR Emitter (3.5mm mono)
• Qty 1: IR Sensor (3.5mm stereo)
To Next Page
Loading...
