KEYBOARDPARTNER HX3 - MIDI Communication Setup; MIDI Channel and Routing Options; MIDI CC Set Selection

HX3.5 Mainboard 21
 MIDI CHANNEL: Sets the MIDI basic receive channel from 1 to 10 (upper manual, lower
manual +1 , pedal + 2).
 MIDI OPTION: Sets the MIDI Routing to
o Local Tx – own MIDI Events are sent to MIDI OUT
o Inp 1 Thru – MIDI IN1 is routed as THRU to MIDI OUT
o Inp 2 Thru – do not use
o USB InThru – USB MIDI IN is routed as THRU to MIDI OUT
 MIDI CC Set: Sets the HX3 accepted MIDI CC set to
o NI B4 d3c: Native Instrument B 4, Döpfer d3c controller (default), NI B4D
o Hammond XK
o Hammond SK (Note: Hammond changed MIDI CC set between XK and SK series, so try
out which fits)
o Versatile MIDI CC Set
o Nord C1/C2/C2D MIDI CC Set
o VoceDrawbar – Voce MIDI drawbars
o KeyB/Duo
o Hamichord (or „Mojo“, same hardware)
o HX3.5/KBP MIDI CC Set
o MIDI Customs CC Sets 1, 2
 MIDI Swell CC: CC number for swell pedal (default 11, expression pedal).
 MIDI VolumeCC: CC number for Master Volume (default 7, volume pedal).
 MIDI PresetCC: CC number for presets (default #32 bank select LSB)