KEYBOARDPARTNER HX3 - Keyboard and MIDI Integration; MIDI Transposition and Splitting

20 HX3.5 Mainboard
Keyboard/MIDI
MIDI Transpos: Allows transposition of sound generation by up to +24/-24 half note steps. Note:
Like the original, tonewheel generator includes 5 octaves. Therefore, notes outside this range do
not sound.
 KeyTranspos: Transposes the note number generated by a directly connected keybed.
 Local On/Off: Interrupts the connection from a directly connected keyboard to the tone
generator. Notes are only sent via MIDI.
 Split Keyb: When ON, the keyboard is split into two zones at the set split point.
 Split Point: Sets split point (when split is ON) as key number (24 is second „C“ on manual).
 Split Mode: Default split setting on power-up, engaged when split set to ON.
o 'PedalToLower', map pedal to lower manual up to split point.
o 'LowerToUpper', map lower to upper manual up to split point.
o 'PedalToUpper', map pedal to upper manual up to split point.
o 'LowerToU +1', map lower to upper manual up to split point, transpose lower +1 octave.
o 'LowerToU +2' map lower to upper manual up to split point, transpose lower +2 octave.
o ‘LwrAddPedal’, links the pedal to the lower manual up to the split point.
Split point and split mode may also be changed by one of the following procedures:
o Pedal to Lower: Press a single key on lower manual key while switching SPLIT on to obtain a
custom split point.
o Lower Add Pedal: Press a two keys on lower manual key while switching SPLIT to link the
pedal to lower manual up to the split point.
o Lower to Upper: Press a single key on upper manual while switching SPLIT on to map lower
to upper manual up to this key.
o Pedal to Upper: Press two keys simultaneously on upper manual while switching SPLIT on to
map pedal to upper manual up to highest of both keys pressed (useful for playing pedal bass
lines on single manual keyboards without bass pedal).
o Lower to Upper +1: Press three keys simultaneously on upper manual while switching SPLIT
on to map lower to upper manual up to highest of all keys pressed. Lower notes range is
transposed one octave up (useful for left-hand 8’ accompaniment chords on single manual
keyboards).
o Lower to Upper +2: Press four keys simultaneously on upper manual while switching SPLIT
on to map lower to upper manual up to highest of all keys pressed. Lower notes range is
transposed two octaves up (useful for left-hand 16’ accompaniment chords on single manual
keyboards).