13
Bluetooth Mode
1. Switch the toggle switch to the Bluetooth option.
2. Backlight will be turned on.
3. Hold “fn+1” key for 4 seconds to activate Bluetooth pairing (the Bluetooth indicator
fast flashes for 3 minutes to detect pairing).
4. Search for the Bluetooth device “Keychron K10 Pro” on your device and connect it
(the Bluetooth indicator goes off after successful pairing).
Note: This keyboard supports pairing up to 3 devices simultaneously via key combination
“fn” + “1” / “fn” + “2” / “fn” + “3”.
The Bluetooth indicator will continue to flash for 3 minutes.
Slow or failed connections may exist due to different Bluetooth versions, please
make sure all the settings are correct.
Switch Bluetooth Devices
Short press key combination “fn” + “1” / “fn” + “2” / “fn” + “3” to switch to another
device.
Reconnect
1. Switch the keyboard to the Bluetooth option to activate the keyboard.
2. The Bluetooth indicator flashes for 4 seconds and automatically pair with the last
paired device-
3. If the Bluetooth indicator is off, press any button to enter the connection again.
The keyboard must have been paired with the device to perform this function.
Turn Off the Keyboard
Switch the keyboard to the OFF option.
Backlight Setting
Short press to switch between different type of lighting effects.
When backlighting is on, press button to switch among them.
To Next Page
Loading...
