Keysight Technologies 5061B - Page 9

Product Declassification and Security Product Name: Network Analyzer
Model Number(s): E5061B/E5063A
Page 9 of 16
Description and
purpose
Non-volatile memory (Flash) for A51 DSP Module. This memory is for
product serial number and option. The system calibration data are also
stored in the E5063A. (Any user data is not stored in these memory)
Size
64 MB
Memory clearing
N/A
Memory sanitization
N/A
Memory removal
The A51 DSM module needs to be removed and replaced with a new or
unused module as per the service manual. See E5061B/E5063A Service
Manual for more detail information on the procedure as well as the
replacement parts.
Write protecting
N/A
Memory validation
N/A
Remarks
Description and
purpose
E5061B Non-volatile memory (EEPROM) for A1, A2, A3, A4, A9 and A11
Modules. These memories are for board serial number, board revision
number. (Any user data is not stored in these memories)
Size
256 M Bit
Memory clearing
N/A
Memory sanitization
N/A
Memory removal
The E5061B A1, A2, A3, A4, A9 and A11 modules need to be removed and
replaced with a new or unused module as per the service manual. See the
E5061B Service Manual for more detail information on the procedure as
well as the replacement parts.
Write protecting
N/A
Memory validation
N/A
Remarks
Description and
purpose
E5063A Non-volatile memory (flash) for A1 Modules. These memories are
for board serial number, board revision number, and system calibration
data.
Size
2 MB
Memory clearing
N/A
Memory sanitization
N/A
Memory removal
The E5063A A1 modules need to be removed and replaced with a new or
unused module as per the service manual. See the E5063A Service Manual
for more detail information on the procedure as well as the replacement
parts.
Write protecting
N/A
Memory validation
N/A
Remarks
Storage removal (E5063A/E5061B-020 only for E5061B )
Because it is virtually impossible to completely and selectively erase all user data on a
hard drive without also destroying the operating system, the best method for maintaining
security when the E5061B/E5063A must be removed from a secure area is to replace the
storage with a "non-secure" hard drive, i.e. a drive that has never had any sensitive data