Keysight Technologies 5061B - Page 10

Product Declassification and Security Product Name: Network Analyzer
Model Number(s): E5061B/E5063A
Page 10 of 16
placed on it. This allows the E5061B/E5063A to still function properly in non-secured
areas or for use when servicing.
The E5061B-020 and all E5063A have a removable storage on the rear panel. Keysight
has available a pre-configured storage for the E5061B/E5063A that must be purchased in
order for this security method to work. A spare disk is available as below.
Product Number
Windows License (See the Windows label on the
rear panel)
Keysight Part
Number
E5061B
Windows Vista Business
Not Assigned
Windows XP Pro for Embedded Systems
E5061-65003
Windows Embedded Standard 7 (For MY494/
SG494, MY495/ SG495)
E5061-65004
Windows Embedded Standard 7 (For MY496/
SG496, MY497/ SG497)
E5061-65054
Windows 10 IoT
E5061-65055
E5063A
Windows Embedded Standard 7 (For MY541/
SG541)
E5063-65001
Windows Embedded Standard 7 (For MY542/
SG542)
E5063-65051
Windows Embedded Standard 7 (For MY543/
SG543)
E5063-65052
Windows 10 IoT
E5063-65056
Note: The limited number of times for removing/connecting is 50 times.
Hard disk removal procedure:
Two main variants of removable storage with distinct differences according to the listed
serial prefix.
The serial prefix identification is no longer applicable to the instrument(s) with digital
hardware/ OS upgrades applied. Refer to the physical appearance in identifying the
storage removal procedure.
These steps should be followed to maintain security:
Storage Removal Procedure A – Applicable to the following serial numbers
E5061B – Serial Prefix MY497 or SG497 and below
E5063A – Serial Prefix MY542 or SG542 and below
Storage Removal Procedure B – Applicable to the following serial numbers
E5061B – Serial Prefix MY498 or SG498 and above
E5063A – Serial Prefix MY543/MY544/MY545 or SG543/SG544/SG545 and above