Keysight E364xA User’s and Service Guide 5
– Do not use MAINS supply cords by inadequately RATED cord. Always
use the MAINS supply cord provided by the manufacturer.
– Do not use the device if it appears damaged or defective. REMOVE
POWER and do not use the device until safe operation is verified by
service-trained personnel. If necessary, return the device to Keysight
for service and repair to ensure that the safety features are maintained.
– Do not operate the device around flammable gases or fumes, vapor, or
wet environments.
– Observe all markings on the device before connecting any wiring to
the device.
– Turn off the output of the power supply before connecting to the
output terminals.
– When servicing the device, use only the specified replacement parts.
– Do not install substitute parts or perform any unauthorized
modification to the device. Return the device to Keysight for service
and repair to ensure that the safety features are maintained.
– Do not operate the device with the cover removed or loosened.
To Next Page
Loading...
Need help?
General
