To Next Page
E
Eduardo MartinAug 5, 2025
What to do if Keysight Technologies Infiniium MXR254A oscilloscope turns off unexpectedly?
- CcathywilliamsAug 5, 2025
If your Keysight Technologies Test Equipment oscilloscope turns off unexpectedly, try these steps: * Unplug the AC power cord from the rear of the instrument, wait 20 to 30 seconds, and then plug it back in. After that, press the front panel power button. * If the issue persists, perform a hard shutdown by holding the power button down for 5-6 seconds until the power turns off. Then, press the power button again to restart the oscilloscope.
General
