Keysight PXI/AXIe Chassis Reference Guide 19
Guidelines to Diagnose and Resolve Communication Problems
System Module Driver Needs to be Installed in PC Configuration
The system module driver must be installed when setting up the PXIe or AXIe
system. The Desktop Adapter module does not require a driver and it cannot be
seen in the Device Manager. However, the System Module is like all other
modules connected on the chassis backplane – it needs its driver to
communicate with the chassis. Without this driver, you will not be able to see the
chassis or its installed modules on the system in Windows Device Manager.
Make sure the System Module driver is installed in the host controller. Refer to
the System Module web page to install this driver.
Install Controller Driver in Embedded Controller Configuration
Typically, when you purchase an embedded controller, it is delivered with the
embedded controller driver installed. However, if you re-image the controller
with your own version of the operating system, you need to reinstall this driver to
get your system to work properly. Refer to the embedded controller websites to
install this driver.
To Next Page
Loading...
Need help?
General