38 X-Series Signal Analyzers Getting Started and Troubleshooting Guide
Front and Rear Panel Features
Front and Rear Panel Symbols
Front and Rear Panel Symbols
This symbol is used to indicate power ON (green LED).
This symbol is used to indicate power STANDBY mode
(yellow LED).
This symbol indicates the input power required is AC.
The instruction documentation symbol. The product is
marked with this symbol when it is necessary for the
user to refer to instructions in the documentation.
The CE mark is a registered trademark of the European
Community.
The RCM mark is a registered trademark of the
Australian Spectrum Management Agency.
“This ISM device complies with Canadian ICES-001.”
“Cet appareil ISM est conforme a la norme NMB du
Canada.”
This is a symbol of an Industrial Scientific and Medical Group 1 Class A
product. (CISPR 11, Clause 4)
The CSA mark is a registered trademark of the CSA
International.
This symbol indicates separate collection for electrical
and electronic equipment mandated under EU law as of
August 13, 2005. All electric and electronic equipment
are required to be separated from normal waste for
disposal (Reference WEEE Directive 2002/96/EC).
Indicates the time period during which no hazardous or
toxic substance elements are expected to leak or
deteriorate during normal use. Forty years is the
expected useful life of the product.
This symbol on all primary and secondary packaging
indicates compliance to China standard GB
18455-2001.
South Korean Certification (KC) mark; includes the
marking’s identifier code which follows this format:
MSIP-REM-YYY-ZZZZZZZZZZZZZZ.
To Next Page
Loading...
