X-Series Signal Analyzers Getting Started and Troubleshooting Guide 53
Instrument Operating System
Configuring LAN
Configuring LAN
Hostname
The Computer Name, or Hostname, is preconfigured from the factory. It must
be a unique name such that it does not conflict with other equipment on your
LAN. The preconfigured Computer Name is A-<model number>-xxxxx, where
xxxxx is the last 5 digits of the instrument’s serial number.
IP Address & Gateway
The instrument is preconfigured to obtain an IP Address via DHCP. You can
change the IP Address and Gateway as you desire.
You must be logged in as an "administrator" (default password:"Keysight4u!")
to make changes.
Connecting to a Network Shared Folder
The instrument contains standard Windows networking. The time required to
authenticate is dependent on your LAN infrastructure. You may have improved
performance by mapping a network drive to the shared folder that you need to
access.
To map a network drive, click the Start icon ., System Tools, Computer.
Select the Computer Tab, and select Map Network Drive from the drop down
menu:
.
To Next Page
Loading...
