Keysight 34921A-34925A Low Frequency Multiplexer Modules User’s Guide 49
Low Frequency Multiplexer Modules
- using the *RST command. This command resets the mainframe and all
installed modules to the Factory configuration. This affects all installed
modules.
- cycling system power. This affects all installed modules.
If the overvoltage situation is not resolved, clearing the overvoltage will result in
a new overvoltage event occurring immediately.
Further FET protection is assured only as one channel in each bank is closed at
any time. Thus this module will operate as only a 1:N MUX module. For more
information about FET channel closures, refer to page 12.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
