Keysight Technologies
CX3300 Current Waveform Analyzer
Quick Operation Guide
How to perform the FFT ( Fast Fourier Transform )
1. How to apply the FFT
1-1. Click the “Analysis” icon on the Tool Palette.
1-2. Drag and drop the “Spectrum” icon on the Analysis tool palette onto
the chosen area of interest on the waveform.
Note:
- If the Zoom window is displayed in the lower half, the dragged icon is always
effective for the zoomed waveform.
1-1
1-2
Drag & drop
44
To Next Page
Loading...
