Need help?Do you have a question about the Keysight Infiniium MSOS254A: Infiniium DSOS404A and is the answer not in the manual?
General| Channels | 4 analog + 16 digital |
|---|---|
| Display | 15.6-inch capacitive touchscreen |
| Input Coupling | AC, DC, GND |
| Input Impedance | 50 Ω or 1 MΩ |
| Vertical Resolution | 8 bits |
| Maximum Input Voltage | 5 Vrms (50 Ω) |
| Trigger Types | Edge, Pattern, TV, CAN/LIN/FlexRay, I2C/SPI, USB |
| Connectivity | USB 2.0 |
Details on how to safely connect the oscilloscope to a power source.
Steps for attaching and connecting probes to the oscilloscope channels.
Procedure for powering on the Infiniium S-Series oscilloscope.
Steps to confirm the oscilloscope is functioning correctly after setup.
Details the function of physical buttons and knobs on the oscilloscope.
Procedures for initiating, pausing, and stopping waveform data acquisition.
How to configure horizontal scale, position, and zoom for waveform analysis.
Configuring trigger conditions like edge, slope, and source for signal capture.
How to perform measurements and use markers for precise analysis.
To Next Page