Need help?Do you have a question about the Keysight Infiniium DSOS254A and is the answer not in the manual?
General| Bandwidth | 2.5 GHz |
|---|---|
| Channels | 4 |
| Vertical Resolution | 8 bits |
| Input Coupling | AC, DC, GND |
| Operating Temperature | 0 °C to 50 °C |
| Input Impedance | 50 Ω, 1 MΩ |
| Trigger Types | Edge, Pulse Width, Pattern, TV, CAN/LIN/FlexRay, I2C/SPI, USB 2.0, Ethernet, Audio |
| Connectivity | USB, LAN, GPIB (optional) |
| Display | 15.6-inch capacitive touchscreen |
Steps for attaching and making connections with oscilloscope probes to input channels.
Steps to confirm proper functionality using default settings and a test signal.
Overview of front panel keys and knobs for direct access to common measurement and setup functions.
Procedures for initiating, pausing, and stopping the acquisition of waveform data.
Configuration of trigger conditions, sources, slope, and level for precise signal capture.
Techniques for performing automated measurements and using markers for precise analysis of waveform data.
Procedures to reset the oscilloscope to default or factory settings for troubleshooting or restoration.
To Next Page
