Need help?Do you have a question about the Keysight Infiniium MSOS404A and is the answer not in the manual?
General| Bandwidth | 4 GHz |
|---|---|
| Channels | 4 analog + 16 digital |
| Sample Rate | 20 GSa/s |
| Vertical Resolution | 8 bits |
| Input Impedance | 50 Ω or 1 MΩ |
| Input Coupling | AC, DC, GND |
| Operating Temperature | 0 °C to 50 °C |
| Trigger Modes | Edge, Pulse Width, Pattern, Video |
| Display Size | 12.1 inch |
| Connectivity | USB, LAN, HDMI, GPIB (optional) |
Instructions for connecting the power cord to the oscilloscope and a suitable AC source, emphasizing grounding.
Steps for attaching probe connectors to oscilloscope channels or trigger inputs and connecting to the circuit.
Describes pressing the power switch on the front panel to turn on the oscilloscope.
Describes the function of front panel keys and knobs for direct control of vertical and horizontal parameters.
Guides on initiating, halting, and performing single waveform acquisitions using run controls.
Instructions on configuring horizontal scale, position, and using zoom for waveform analysis.
Explains how to set vertical scaling and offset for analog channels and turn channels on/off.
Details how to configure trigger conditions, sources, slopes, and levels for signal acquisition.
Covers using measurement controls, markers, and quick measurements for analyzing waveform data.
To Next Page
