Need help?Do you have a question about the Keysight InfiniiVision DSOX1204A and is the answer not in the manual?
General| Bandwidth | 200 MHz |
|---|---|
| Channels | 4 |
| Display Size | 7 inch |
| Form Factor | Benchtop |
| Vertical Resolution | 8 bits |
| Connectivity | USB, LAN |
| Memory Depth | 1 Mpts |
| Display Type | WVGA LCD |
| Input Impedance | 1 MΩ |
| Input Voltage Range | 300 Vrms CAT II |
Verify received items and check for shipping damage.
Instructions for connecting power and turning on the oscilloscope.
Guidance on connecting probes to the oscilloscope's input channels.
Adjusting probe compensation for accurate signal measurements.
Overview of front panel buttons, knobs, and ports.
Understanding the elements and information on the oscilloscope screen.
How to use the oscilloscope's integrated help system.
Managing data acquisition states: running, stopping, and single captures.
Adjusting time base, position, and zoom for waveform display.
Adjusting volts/division, position, and invert for waveform display.
Setting up trigger conditions to capture specific events.
Performing automatic measurements like voltage, time, and frequency.
Verifying waveform compliance against predefined masks.
Decoding and triggering on serial communication protocols.
Configuring oscilloscope functions like I/O, file explorer, and preferences.
Technical details and performance specifications of the oscilloscope.
Explanation of symbols and regulatory compliance markings.
To Next Page