Keysight InfiniiVision DSOX1204A User Manual

Keysight InfiniiVision DSOX1204A/G Oscilloscopes User's Guide 5
In This Guide
This guide shows how to use the InfiniiVision DSOX1204A/G oscilloscopes.
When unpacking and using the
oscilloscope for the first time, see:
• Chapter 1, “Getting Started,” starting on page 11
When displaying waveforms and
acquired data, see:
• "Running, Stopping, and Making Single
Acquisitions (Run Control)" on page 32
• "Horizontal Controls" on page 33
• "Vertical Controls" on page 36
• "Analog Bus Display" on page 39
• "FFT Spectral Analysis" on page 40
• "Math Waveforms" on page 44
• "Reference Waveforms" on page 46
• "Display Settings" on page 47
When setting up triggers or changing
how data is acquired, see:
• "Triggers" on page 50
• "Acquisition Control" on page 54
Making measurements and analyzing
data:
• "Cursors" on page 61
• "Measurements" on page 63
• "Mask Testing" on page 65
• "Digital Voltmeter" on page 72
• "Frequency Response Analysis" on page 73
When using the built-in waveform
generator, see:
• "Waveform Generator" on page 75
When using licensed serial bus
decode and triggering features, see:
• "Serial Bus Decode/Trigger" on page 76
When saving, recalling, or printing,
see:
• "Save/Recall (Setups, Screens, Data)" on page 82
• "Print (Screens)" on page 85

Keysight InfiniiVision DSOX1204A Specifications

General

Brand	Keysight
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English