Figure: Contact Ixia Technical Support to obtain end caps
Affected load modules include the following:
l NGY with SFP+ interface, 2/4/8-port, all models
l Dual PHY SFF cards with RJ45 and SFP Gigabit (TXS and STXS)
l ACCELERON-NP and -XP
l LSM1000XMV 4/8/12/16-port, all models
l LSM1000XMS12/12R
l ASM1000XMV12X/12XRTP
Use Ejector Tabs Properly
Ejector tabs on load modules are to be used only to eject a load module from the chassis backplane
connector. They are not designed to support the weight of the load module. Ejector tabs can bend if
Chapter 2 Installation
– 6 –
To Next Page
Loading...