Note: Any Ixia chassis must be always operated with the chassis cover closed and with all card
face plates mounted.
Initial Chassis/Peripheral Connection
To perform initial chassis configuration for Windows XP Professional, a monitor, keyboard, and mouse
must be connected to the chassis.
To configure TCP/IP, do the following:
1.
Attach the monitor, keyboard and mouse to the ports on the back of the XGS12-SD chassis, or
the front of the XM12 chassis as shown in the following figures.
Figure: Rear View of IXIA XGS12-SD Chassis with USB Keyboard and Mouse
Chapter 2 Installation
– 9 –
To Next Page
Loading...