Keysight Ixia IxOS - Windows XP Professional Configuration

Figure: Initial Window Display from Locally Connected Monitor
Windows XP Professional and Windows 7 Configuration
The Windows XP Professional and Windows 7 configuration procedure is explained in the following
sections.
Windows XP Professional TCP/IP Configuration
The network address of the chassis must be set, even if the network is not used.
1. To do this, click in the following sequence of items: Start (in the lower left-hand corner of your
computer screen), Settings, Network and Dial-up Connections, and Local Area
Connection, as shown in the following figure:
Figure: Mouse Clicks to Invoke Network Properties
Chapter 2 Installation
– 11 –