Figure: Application Selector with Tcl Version Selected
Application Selector indicates that Tcl version 8.5.17.0 has no dependencies.
Repair, Modify, Uninstall using Windows Control Panel
In addition to the Silent Repair/Modify procedure, you can use the Windows Control Panel to uninstall,
modify, or repair the IxOS software. The following circumstances may indicate using this approach:
a. Uninstall the IxOS software: Use the Remove dialog box.
b.
Modify: This allows to add or remove specific components involved in the IxOS installation. For
example, if only the Tcl client was installed, and the Tcl Server was not installed, you can use the
Modify dialog box to install the Tcl Server. Or, if you have installed the Demo Server and want
to remove it, you can use this dialog box.
c.
Repair: If you notice some missing files in the installation that may have been deleted or
modified, you can use the Repair dialog box.
To uninstall the IxOS software, do the following:
1. From the Windows Start menu, click Settings->Control Panel.
2. From the Control Panel, double-click the Add or Remove Programs option.
Chapter 2 Installation
– 72 –
To Next Page
Loading...