8. Click Change settings. The System Properties window appears as shown in the following
figure:
Figure: System Properties - Computer Name tab
9. The Computer Name shown in the System Properties window is an example of the pre-
configured name assigned to each chassis. Each chassis’ name is of the form <TYPE>-
<SERIALNO>. <TYPE> is corresponding to the type of chassis. <SERIALNO> is the chassis serial
number and is always six digits long. By default, each chassis is also a member of the IXIA
workgroup. This may be changed at this time to another workgroup or as a member of a Windows
Chapter 2 Installation
– 25 –
To Next Page
Loading...