Keysight MXG A Series - 2 Products Covered by this Document; Document Purpose

Security Features and Document of Volatility
Products Covered by this Document
6
2 Products Covered by this Document
Document Purpose
This document describes instrument memory types and security features. It
provides a statement regarding the volatility of all memory types, and specifies
the steps required to declassify an instrument through memory clearing,
sanitization, or removal.
For additional information, go to:
http://www.keysight.com/find/security
IMPORTANT Be sure that all information stored by the user in the instrument that needs to
be saved is properly backed up before attempting to clear any of the
instrument memory. Keysight Technologies cannot be held responsible for
any lost files or data resulting from the clearing of memory.
Be sure to read this document entirely before proceeding with any file
deletion or memory clearing.
Product Family
Name
Product Name Model Number Firmware Revision
X-Series Signal
Generators
MXG Signal Generator (Series A) N5183A
N5182A
N5181A
N5162A
a
N5161A
a
a. For the N5161A/62A Signal Generators, the softkey menus and features described in this guide are only
available through the web-enabled interface or via SCPI commands. Refer to the instrument Installation
Guide, Programming Guide and SCPI Programmers Reference for more information.
All
Keysight Signal
Generators
ESG Signal Generator
E4438C
b
b. See “Recommended Software Upgrades” on page 7 for important firmware version information.
C.03.40 or higher
E4428C
b
All