Keysight N4693D - Page 114

5-24 Electronic Calibration Modules Reference Guide
Specifications and Characteristics
Typical Pin Depth Values
5-
Table 5-38 7-16 Connector Pin Depth Characteristics
Device Typical Pin Depth
in Millimeters
(10
–4
inches)
Measurement Uncertainty
a
in Millimeters
(10
–4
inches)
Observed Pin Depth Limits
in Millimeters
(10
–4
inches)
7–16 ECal Module (N4431D) –0.0000 to –0.0381
(0.0 to –15.0)
+0.0038 to –0.0038
(+1.5 to –1.5)
+0.0038 to –0.0419
(+0.5 to –16.5)
a. Approximately +2 sigma to –2 sigma of gage uncertainty based on studies performed at the factory using precision digital
gages according to recommended procedures.