Electronic Calibration Modules Reference Guide 4-5
Use, Maintenance, and Care of the Devices
Inspect Female Connectors
Inspect Female Connectors
When using slotless connectors like the 3.5 mm or some Type-N 50 Ω female
connectors, pay special attention to the contact fingers on the female center
conductor. These can be bent or broken, and damage to them is not always
easy to see. A connector with damaged contact fingers will not make good
electrical contact and must be repaired or replaced.
Due to the tighter mechanical specifications of precision devices,
inspection is particularly important when you are mating nonprecision to
precision devices.
To Next Page
Loading...
