Notices
©
 Keysight Technologies, Inc. 
2008-2019
No part of this manual may be 
reproduced in any form or by any 
means (including electronic storage 
and retrieval or translation into a 
foreign language) without prior 
agreement and written consent from 
Keysight Technologies, Inc. as 
governed by United States and 
international copyright laws.
Trademark Acknowledgments
Manual Part Number
N7550-90002
Edition
Edition 1, March 2020
Printed in USA/Malaysia
Published by:
Keysight Technologies
1400 Fountaingrove Parkway 
Santa Rosa, CA 95403
Warranty
THE MATERIAL CONTAINED IN THIS 
DOCUMENT IS PROVIDED “AS IS,” 
AND IS SUBJECT TO BEING 
CHANGED, WITHOUT NOTICE, IN 
FUTURE EDITIONS. FURTHER, TO 
THE MAXIMUM EXTENT PERMITTED 
BY APPLICABLE LAW, KEYSIGHT 
DISCLAIMS ALL WARRANTIES, 
EITHER EXPRESS OR IMPLIED WITH 
REGARD TO THIS MANUAL AND 
ANY INFORMATION CONTAINED 
HEREIN, INCLUDING BUT NOT 
LIMITED TO THE IMPLIED 
WARRANTIES OF 
MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. 
KEYSIGHT SHALL NOT BE LIABLE 
FOR ERRORS OR FOR INCIDENTAL 
OR CONSEQUENTIAL DAMAGES IN 
CONNECTION WITH THE 
FURNISHING, USE, OR 
PERFORMANCE OF THIS 
DOCUMENT OR ANY INFORMATION 
CONTAINED HEREIN. SHOULD 
KEYSIGHT AND THE USER HAVE A 
SEPARATE WRITTEN AGREEMENT 
WITH WARRANTY TERMS 
COVERING THE MATERIAL IN THIS 
DOCUMENT THAT CONFLICT WITH 
THESE TERMS, THE WARRANTY 
TERMS IN THE SEPARATE 
AGREEMENT WILL CONTROL.
Technology Licenses
The hardware and/or software 
described in this document are 
furnished under a license and 
may be used or copied only in 
accordance with the terms of 
such license.
U.S. Government Rights
The Software is “commercial 
computer software,” as defined 
by Federal Acquisition Regulation 
(“FAR”) 2.101. Pursuant to FAR 
12.212 and 27.405-3 and 
Department of Defense FAR 
Supplement (“DFARS”) 227.7202, 
the U.S. government acquires 
commercial computer software 
under the same terms by which 
the software is customarily 
provided to the public. 
Accordingly, Keysight provides 
the Software to U.S. government 
customers under its standard 
commercial license, which is 
embodied in its End User License 
Agreement (EULA), a copy of 
which can be found at 
http://www.keysight.com/find/s
weula The license set forth in the 
EULA represents the exclusive 
authority by which the U.S. 
government may use, modify, 
distribute, or disclose the 
Software. The EULA and the 
license set forth therein, does not 
require or permit, among other 
things, that Keysight: (1) Furnish 
technical information related to 
commercial computer software 
or commercial computer 
software documentation that is 
not customarily provided to the 
public; or (2) Relinquish to, or 
otherwise provide, the 
government rights in excess of 
these rights customarily provided 
to the public to use, modify, 
reproduce, release, perform, 
display, or disclose commercial 
computer software or 
commercial computer software 
documentation. No additional 
government requirements 
beyond those set forth in the 
EULA shall apply, except to the 
extent that those terms, rights, or 
licenses are explicitly required 
from all providers of commercial 
computer software pursuant to 
the FAR and the DFARS and are 
set forth specifically in writing 
elsewhere in the EULA. Keysight 
shall be under no obligation to 
update, revise or otherwise 
modify the Software. With 
respect to any technical data as 
defined by FAR 2.101, pursuant 
to FAR 12.211 and 27.404.2 and 
DFARS 227.7102, the U.S. 
government acquires no greater 
than Limited Rights as defined in 
FAR 27.401 or DFAR 227.7103-5 
(c), as applicable in any technical 
data.
Safety Notices
A CAUTION notice denotes a hazard. 
It calls attention to an operating 
procedure, practice, or the like that, 
if not correctly performed or adhered 
to, could result in damage to the 
product or loss of important data. Do 
not proceed beyond a CAUTION 
notice until the indicated conditions 
are fully understood and met. 
A WARNING notice denotes a 
hazard. It calls attention to an 
operating procedure, practice, or the 
like that, if not correctly performed or 
adhered to, could result in personal 
injury or death. Do not proceed 
beyond a WARNING notice until the 
indicated conditions are fully 
understood and met.