Keysight N5741A - Page 58

4 Operating the Power Supply Remotely
58 Series N5700 User’s Guide
Factory-shipped LAN Settings
The factory-shipped LAN settings documented in the following table
are optimized for connecting your power supply to a site network.
They should also work well for other network configurations.
The factory-shipped settings can be restored by pressing and holding
the front panel LAN button for three seconds. Pressing the LAN
button again while the message “LAn rES” is displayed resets the
LAN settings.
Factory-shipped non-volatile LAN settings
Get IP Address
Automatic
Alternate DNS server
Blank
IP Address
169.254.57.0
Desired Hostname
A-N57xxA-xxxxx
Subnet Mask
255.255.0.0
Description
Keysight N57xxA (serial#)
Default Gateway
0.0.0.0
mDNS Enabled
Enabled
DNS Server Address Configuration
Automatic
Password
Blank
Preferred DNS server
Blank