Keysight N5741A - Page 6

6 Series N5700 User’s Guide
In this Book
This User’s Manual contains the operating instructions, installation
instructions, and specifications of the Keysight Technologies Series
N5700 750W and 1500W System DC Power Supplies. Specific
chapters in this manual contain the following information:
 Quick Reference – Chapter 1 is a quick reference section that
helps you quickly become familiar with your Keysight N5700
power supply.
 Installation – Chapter 2 describes how to install your power
supply. It describes how to connect various loads to the output. It
discusses remote sensing as well as parallel and series operation.
 Operating the Power Supply Locally – Chapter 3 describes how to
operate the power supply from the front panel and from the
analog connector on the rear panel. It also includes a turn-on
check-out procedure to verify the unit is operating properly.
 Operating the Power Supply Remotely – Chapter 4 describes how
to configure the remote interfaces. It also gives a brief overview
of the SCPI command structure and basic programming concepts.
 Language Reference – Chapter 5 describes all of the SCPI
programming commands.
 Programming Examples – Chapter 6 provides Visual BASIC
example programs that illustrate some common applications.
 Specifications – Appendix A describes specifications and
supplemental characteristics.
 Verification and Calibration Procedures – Appendix B explains
the verification and calibration procedures.
 Service – Appendix C describes what to do if your unit requires
service.
 Compatibility – Appendix D documents the compatibility
commands of the Keysight 603xA power supplies that are
supported by the Keysight N5700 power supplies.
NOTE
You can contact Keysight Technologies at one of the following telephone
numbers for warranty, service, or technical support information.
In the United States: (800) 829-4444
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or use our Web link for information on contacting Keysight in your country or
specific location: www.keysight.com/find/assist
Or contact your Keysight Technologies Representative.
The web contains the most up to date version of the manual. Go to
http://www.keysight.com/find/N5700 to get the latest version of the manual.