Keysight N8973B Security Features And Document Of Volatility

Security Features and Document of Volatility 28
Disk Drive Removal Procedure
1. Locate the Processor and Disk Drive Assembly on the instrument’s rear panel, as
shown in Figure 6-1.
2. Locate the removable drive, and its retaining thumbscrew, as shown in Figure 6-1.
Figure 6-1 Instrument Rear Panel & Processor Assembly
3. Turn the thumbscrew to release the drive from the panel, as shown in Figure 6-2
below. If the thumbscrew is too tight to turn by hand, use a TORX T10 screwdriver to
loosen it.

Keysight N8973B Specifications

General

Brand	Keysight
Model	N8973B
Category	Measuring Instruments
Language	English