Name: Keysight PXA Series
Brand: Keysight
Rating: 4 (1 reviews)

To Next Page

To Previous Page

18 Installation Note N9030-90058

Option EXM, External Mixing Upgrade Kit

Front Frame Replacement

1. Refer to Figure 11. Reattach the ribbon cable W1. Ensure the locking tabs are engaged.

2. Refer to Figure 12. Carefully position the Front Frame Assembly onto the chassis. Ensure no

cables are crushed. Replace the eight screws (1) (0515-1035), four on each side of the chassis.

Torque to 9 inch pounds.

Figure 11 Front Panel Cable

Figure 12 Front Frame Replacement

Questions and Answers:

Need help?

Do you have a question about the Keysight PXA Series and is the answer not in the manual?

Keysight PXA Series Specifications

General

Frequency Range	3 Hz to 50 GHz (depending on model)
Phase Noise	-136 dBc/Hz at 1 GHz and 10 kHz offset (typical)
Resolution Bandwidth	1 Hz to 10 MHz
Input Impedance	50 Ohm
Dimensions	177 mm (H) x 426 mm (W) x 470 mm (D)