Vehicle driving controls
Non-operating condition(s)
• Cruise Control of Smart Cruise Control is operating
• When the charging status of the high voltage battery is too high
• The vehicle is in SNOW mode
• The trailer is installed
• When the DBC (Driving Downhill) function is operating
i-Pedal
i-Pedal is controlled by acceleration pedal. It provides vehicle speed control without
manually controlling the paddle shifter.
Operation
1. Pull the left side ( ) of the paddle shifter to level 3 regenerative braking sys
tem.
2. Pull the left side of the paddle shifter once again when the regenerative braking
level reaches level 3.
• Check i-Pedal indicator symbol i-Pedal on the instrument cluster.
Operating condition(s)
• The driver’s door is closed
• EPB is automatically activated when:
◦ The driver’s door is opened and seat belt is not fastened
◦ The bonnet is opened.
◦ The tailgate is opened.
◦ Vehicle stops for more than approximately 5 minutes
◦ At the request of other systems.
Non-operating condition(s)
• Cruise Control of Smart Cruise Control is operating
• When the charging status of the high voltage battery is too high
• The vehicle is in SNOW mode
• The trailer is installed
• When the DBC (Driving Downhill) function is operating
WARNING
• Do not solely rely on one pedal driving to stop the vehicle. Stopping the vehicle may
not be possible depending vehicle and road conditions. Pay attention to the road
condition ahead and apply the brake if necessary.
• Avoid increasing the regenerative braking level suddenly on slippery roads (like
snow or icy conditions) because it may lead slipping of the tyres and skidding of ve
hicle. It can be dangerous due to the loss of the vehicle's steering force.
430
To Next Page
Loading...
