Portable charger
* The example is only for reference and may vary according to the surrounding environment.
Outlet current ICCB charge level
8~9A 6A
10~11A 8A
12~13A 10A
14~16A 12A
How to connect portable charger (ICCB: In-Cable Control Box)
Operation
1. Connect the plug to a household electric outlet.
2. Check if the power lamp (green) appears on the control box.
3. Depress the brake pedal and apply the parking brake.
4. Turn OFF all switches, shift to P (Park), and turn OFF the vehicle. If charging is initi
ated without the gear in P (Park), the charging will start after the gear is automati
cally shifted to P (Park).
5. Open the charging door.
For more details, refer to "Charging door" on page 288 .
6. Open the protection caps of the charging connector and the charging plug. Check
if there are any foreign substances or dust.
7. Hold the charging connector handle and connect it to the vehicle charging inlet.
Push the connector all the way in. If the charging connector and charging terminal
are not connected properly, this may cause a fire.
8. Charging starts automatically (charging lamp appears).
9. Check if the charging indicator light ( ) of the high voltage battery in the instru
ment cluster is turned ON. Charging is not active when the charging indicator light
( ) is OFF. When the charging connector is not connected properly, reconnect
the charging cable to charge it again.
45
To Next Page
Loading...
